Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

CONTENTS

900-910

ErrorDetails

900 Message number -900 not found


901 Message number -901 not found


902 Message number -902 not found


903 Licensed INFORMIX-SQL server not accessible

This statement refers to another host computer system, and that system is active and accessible. However, the sqlexecd network daemon has not been started on it, so no database services can be gotten from it. Contact the DBA of the other system. Check that the INFORMIX-STAR or INFORMIX-NET software is correctly installed

904 Authorization file not on licensed INFORMIX-SQL server

This message indicates that the installation of the Informix networking software was not completed correctly. Review the installation steps on the workstation and on the network server(s) to make sure that it was completed without error

905 Cannot locate sqlexec service /tcp service in /etc/services

The INFORMIX-STAR or INFORMIX-NET software has not been properly installed on this system. In particular, entries in the system-configuration file /etc/services (UNIX) or \etc\services (DOS) have not been made. Contact the person who installs your Informix software

906 Cannot locate database server (check DBPATH)

A server name that your DBPATH environment variable specifies is invalid. This message appears in Version 6.0 and later.
Check that each database server name in your DBPATH setting is valid and is not too long. In Dynamic Server 200, the maximum length for database server names is 128 characters. In other Informix database servers, the maximum length for server names is 18 characters.
Cannot locate remote system (check DBPATH).
INFORMIX-NET is searching for the database that is requested in the current statement. It is using the entries in the DBPATH environment variable and is trying one that, by use of //sitename, specifies a directory on another computer system. That system cannot be accessed.
Review the setting of the DBPATH environment variable. Check that any other systems it specifies have INFORMIX-STAR or INFORMIX-NET installed and active. This message appears prior to Version 6.0.

907 Cannot create socket on current database server

INFORMIX-STAR or INFORMIX-NET is trying to access another computer system but is unable to create a connection. Contact your system administrator, and ask for a check that TCP/IP is correctly installed and functioning

908 Attempt to connect to database server (servername) failed

The program or application is trying to access another database server but has failed. Note the server name in the current statement.
The desired database server is unavailable, or the network is down or is congested. Ask your DBA and system administrator to verify that the server and network are operational. If the network is congested, use the environment variables INFORMIXCONTIME and INFORMIXCONRETRY to tune connection timing. For information on setting these environment variables, see the Informix Guide to SQL: Reference.
This message appears in Version 6.0 and later versions

909 Invalid database name format

This statement seems to refer to a database from another database server, but the database name, site name, server name, or punctuation is incorrect. Review the statement, and check that all identifiers start with a letter (or underscore, for Version 6.0 and later) and contain only letters, digits, and underscores, and that the reference is in the form dbname@sitename or //sitename/dbname (before Version 6.0) or dbname@servername or //servername/dbname (Version 6.0 and later). If you are using INFORMIX-OnLine for NetWare, check that you provided the remote database name in one of the forms that is explained in the product manual

910 Cannot create an Informix Dynamic Server database from an INFORMIX-SE client

This CREATE DATABASE statement cannot be carried out because the database server on your workstation and the one on the other computer system are different products: one is INFORMIX-SE and the other is another Informix database server. You can manipulate databases in this configuration, but you cannot create one.
To create a database, either start the same product in both locations, or run this statement locally on the other computer system.
Cannot create a Dynamic Server or INFORMIX-OnLine database from an INFORMIX-SE client.
This CREATE DATABASE statement cannot be carried out because the database server on your workstation and the one on the other computer system are different products: one is INFORMIX-SE and the other is another Informix database server. You can manipulate databases in this configuration, but you cannot create one. To create a database, either start the same product in both locations, or run this statement locally on the other computer system. The SQLEXEC environment variable (for database servers before Version 6.0) determines which database server your application uses

911-920

ErrorDetails


















921-930

931-940

941-950

951-960

961-970

971-980

981-990

Filter by label

There are no items with the selected labels at this time.


  • No labels