CONTENTS
900-910
| Error | Details |
|---|---|
900 Message number -900 not found | |
901 Message number -901 not found | |
902 Message number -902 not found | |
903 Licensed INFORMIX-SQL server not accessible | This statement refers to another host computer system, and that system is active and accessible. However, the sqlexecd network daemon has not been started on it, so no database services can be gotten from it. Contact the DBA of the other system. Check that the INFORMIX-STAR or INFORMIX-NET software is correctly installed |
904 Authorization file not on licensed INFORMIX-SQL server | This message indicates that the installation of the Informix networking software was not completed correctly. Review the installation steps on the workstation and on the network server(s) to make sure that it was completed without error |
905 Cannot locate sqlexec service /tcp service in /etc/services | The INFORMIX-STAR or INFORMIX-NET software has not been properly installed on this system. In particular, entries in the system-configuration file /etc/services (UNIX) or \etc\services (DOS) have not been made. Contact the person who installs your Informix software |
906 Cannot locate database server (check DBPATH) | A server name that your DBPATH environment variable specifies is invalid. This message appears in Version 6.0 and later. Check that each database server name in your DBPATH setting is valid and is not too long. In Dynamic Server 200, the maximum length for database server names is 128 characters. In other Informix database servers, the maximum length for server names is 18 characters. Cannot locate remote system (check DBPATH). INFORMIX-NET is searching for the database that is requested in the current statement. It is using the entries in the DBPATH environment variable and is trying one that, by use of //sitename, specifies a directory on another computer system. That system cannot be accessed. Review the setting of the DBPATH environment variable. Check that any other systems it specifies have INFORMIX-STAR or INFORMIX-NET installed and active. This message appears prior to Version 6.0. |
907 Cannot create socket on current database server | INFORMIX-STAR or INFORMIX-NET is trying to access another computer system but is unable to create a connection. Contact your system administrator, and ask for a check that TCP/IP is correctly installed and functioning |
908 Attempt to connect to database server (servername) failed | The program or application is trying to access another database server but has failed. Note the server name in the current statement. The desired database server is unavailable, or the network is down or is congested. Ask your DBA and system administrator to verify that the server and network are operational. If the network is congested, use the environment variables INFORMIXCONTIME and INFORMIXCONRETRY to tune connection timing. For information on setting these environment variables, see the Informix Guide to SQL: Reference. This message appears in Version 6.0 and later versions |
909 Invalid database name format | This statement seems to refer to a database from another database server, but the database name, site name, server name, or punctuation is incorrect. Review the statement, and check that all identifiers start with a letter (or underscore, for Version 6.0 and later) and contain only letters, digits, and underscores, and that the reference is in the form dbname@sitename or //sitename/dbname (before Version 6.0) or dbname@servername or //servername/dbname (Version 6.0 and later). If you are using INFORMIX-OnLine for NetWare, check that you provided the remote database name in one of the forms that is explained in the product manual |
910 Cannot create an Informix Dynamic Server database from an INFORMIX-SE client | This CREATE DATABASE statement cannot be carried out because the database server on your workstation and the one on the other computer system are different products: one is INFORMIX-SE and the other is another Informix database server. You can manipulate databases in this configuration, but you cannot create one. To create a database, either start the same product in both locations, or run this statement locally on the other computer system. Cannot create a Dynamic Server or INFORMIX-OnLine database from an INFORMIX-SE client. This CREATE DATABASE statement cannot be carried out because the database server on your workstation and the one on the other computer system are different products: one is INFORMIX-SE and the other is another Informix database server. You can manipulate databases in this configuration, but you cannot create one. To create a database, either start the same product in both locations, or run this statement locally on the other computer system. The SQLEXEC environment variable (for database servers before Version 6.0) determines which database server your application uses |
911-920
| Error | Details |
|---|---|
911 System error – Cannot read from pipe | This internal error reflects a failure in communication between your application and the INFORMIX-STAR or INFORMIX-NET software. Look for operating-system error messages that might give more information. Restart the application. If the problem recurs, please note all circumstances and contact Informix Technical Support |
912 Network error – Could not write to database server | A network failure occurred. Look for operating-system error messages that might give more information. Restart the application. If the problem recurs, contact your system administrator, and ask for network diagnostics to be run |
913 Network error – Could not read from database server | A network failure occurred. Look for operating-system error messages that might give more information. Restart the application. If the problem recurs, contact your system administrator, and ask for network diagnostics to be run |
914 System error – Cannot write to pipe | This internal error reflects a failure in communication between your application and the INFORMIX-STAR or INFORMIX-NET software. Look for operating-system error messages that might give more information. Restart the application. If the problem recurs, please note all circumstances and contact Informix Technical Support |
915 Cannot create an INFORMIX-SE database from an Informix Dynamic Server client | This CREATE DATABASE statement cannot be carried out because the database server on your workstation and the one in the other computer system are different products: one is INFORMIX-SE and the other is another Informix database server. You can manipulate databases in this configuration, but you cannot create one. To create a database, either start the same product in both locations, or run this statement locally on the other computer system |
916 NFS mount table error | The database server that you tried to access or a path that was specified in your DBPATH environment variable is located on an NFS-mounted file system. However, the database server or client application encountered an error accessing the NFS-mounted table file /etc/mtab (or, on some operating systems, /etc/mnttab). This condition probably occurred because your account does not have read permission for the file. Contact your system administrator, and have the file made readable to public. This message appears with Version 6.0 and later. Cannot open /etc/mtab. The database server needs to check the system configuration file /etc/mtab to verify the location of a file system. However, it got an error when it tried to read that file, probably because your account does not have read permission for it. Contact your system administrator, and have the file made readable to public. This message appears prior to Version 6.0 |
917 Must close current database before using a new database | This statement (DATABASE or CREATE DATABASE) requires you to open a different database. However, the current database is located on another computer system, so you must explicitly close it with the CLOSE DATABASE statement. (When you work with databases located on the same computer as your application program, the database server will close the current database for you automatically.) If a program receives this error, review the program logic, and check that it executes a CLOSE DATABASE statement before a CREATE DATABASE statement. This solution will work in all situations, networked or local |
918 Unexpected data received from another database server | This internal error reflects a failure in communication between your application and the INFORMIX-STAR or INFORMIX-NET software at another site. Restart your application. If the problem recurs, ask your system administrator to run network diagnostics. If the error recurs, please note all circumstances and contact Informix Technical Support |
919 System error. Wrong number of arguments to database server process | This internal error reflects a failure in communication between your application, INFORMIX-STAR or INFORMIX-NET software, and the database server on the other computer system. Check that all three of these software components are at compatible software levels. (For versions prior to Version 6.0, see the appropriate INFORMIX-NET/INFORMIX-STAR Installation and Configuration Guide for a compatibility chart). Recompile and relink your application program if necessary. If the problem recurs, please note all circumstances and contact Informix Technical Support |
920 Message number -920 not found |
921-930
| Error | Details |
|---|---|
921 System error. Illegal or wrong number of arguments to sqlexec server | This internal error reflects a failure in communications between your application and the database server on the other computer system. Check that all software components are at compatible software levels. Recompile and relink your application program if necessary. If the problem recurs, please note all circumstances and contact Informix Technical Support. For a Windows NT system, check your Client Installation and Configuration Guide for information about using Setnet32 to set the environment variables that affect client-server communications. For versions prior to Version 6.0, see the appropriate INFORMIX-NET/INFORMIX-STAR Installation and Configuration Guide for a compatibility chart |
922 Cannot get name of current working directory | A problem exists with the current working directory on this system or on another computer system that your application is using. Possibly your account does not have read access to the directory, or possibly the file system that contains it is improperly mounted. Exit your application, and retry. If the problem persists, see your system administrator for assistance |
923 INFORMIX is not licensed to access the current database server only | This version of the Informix product is not licensed for network use. Locate the version of the software that is licensed for use with INFORMIX-STAR or INFORMIX-NET, and reset your INFORMIXDIR environment variable and the SQLEXEC environment variable (for database servers prior to Version 6.0) to point to it |
924 INFORMIX is not licensed to access the specified database server | If you have installed an INFORMIX-NET NET station package only on your client computer, you cannot access locally resident databases. If the database that you are attempting to access is not locally resident, enter the command again and specify a site name with the database name, or set your DBPATH environment variable to indicate searches only in specific sites. If you want to use your Informix product to access both local and remote databases, please contact your Informix representative for details on purchasing the appropriate Informix product |
925 The protocol type should be tcp | The protocol type that is shown in the $INFORMIXDIR/etc/sqlhosts file (or in \INFORMIX\etc\sqlhosts on INFORMIX-OnLine for NetWare) should be tcp |
926 The database server is not licensed for distributed data access | This statement refers to a database in a different database server (for example, by qualifying the name of a table with dbname@sitename:table). However, this version is not licensed for such use. With this version, you can refer only to tables in databases that are all on the same database server. Contact your Informix representative about upgrading this database server to full INFORMIX-STAR status. If you believe that you have INFORMIX-STAR installed, check the contents of the INFORMIXDIR environment variable. If you are using INFORMIX-OnLine for NetWare, you cannot access tables or databases on remote systems unless you have INFORMIX-NET PC. INFORMIX-OnLine is not licensed for distributed data access. This statement refers to a database in a different database server (for example, by qualifying the name of a table with dbname@sitename:table). However, this version is not licensed for such use. With this version, you can refer only to tables in databases that are all on the same database server. Contact your Informix representative about upgrading this database server to full INFORMIX-STAR status. If you believe that you have INFORMIX-STAR installed, check the contents of the INFORMIXDIR environment variable. If you are using INFORMIX-OnLine for NetWare, you cannot access tables or databases on remote systems unless you have INFORMIX-NET PC |
927 Exceeded limit on maximum number of servers you can reference | This statement contains references to more sites than the database server can handle. Through Version 4.1, the limit on different site names that can appear in one statement is 32 (later versions might allow more). Review the statement, and check that only necessary sites are named. If so, revise the operation to use fewer sites (for example, by selecting some data into a local, temporary table) |
928 The database server is not licensed for distributed data access | This statement refers to a database on a different computer system (for example, by qualifying the name of a table with dbname@sitename:table). However, the database server that is active at the indicated site is not licensed for such use. This situation indicates an error in the setup of the remote computer system: it was configured for network access, but the wrong database server was started. Contact the network administrator, and ask for a check of the environment variables when starting the sqlexecd daemon. If you are using INFORMIX-OnLine for NetWare, you tried to access a table on an database server that is not licensed for remote access; you can access only other INFORMIX-NET PC systems |
929 Message number -929 not found | |
930 Cannot connect to database server servername | The application is trying to access another computer system but failed. Note the server name in the current statement. Ask your network administrator and DBA to check that the network is operational and that the particular database server is active. This message appears with Version 6.0 and later. Cannot connect to remote host sitename. INFORMIX-STAR or INFORMIX-NET is trying to access another computer system but has failed. Note the site name in the current statement. Contact your network administrator, and ask for a check that the network is operational and that the particular site is active. This message appears in database servers prior to Version 6.0 |
931-940
| Error | Details |
|---|---|
941-950
951-960
961-970
971-980
981-990
Related articles
Filter by label
There are no items with the selected labels at this time.
0 Comments